References
Selected significant references:
Continental Automotive Systems Czech Republic s.r.o.
2012, Frenštát p.R., Czech Republic, Packiging Inspection Machine, Semi-automatic machine with two-position manual rotating table. Inspection of presence of the product and accessories in a package (PET bag). Camera system optimized for image acquisition through the bag. Compensation of high position variation.
Continental Automotive Czech Republic s.r.o.
2011, Brandýs nad Labem, Czech Republic, Station for upload of car radio firmware, design and delivery of complete equipment, firmware upload (flashing) through USB, RS-232 or ethernet, drawer radio loading concept with DIO for radio control/power on, status information, flashing state, upload sequence selected automatically according to radio type and version, flashing progress visualized with LEDs on each drawer, process visualization and monitoring on control PC
Edwards, s.r.o.
2011, Lutín, Czech Republic, Software for Vacuum Pump Production and Testing Line, Development and installation of software applications for vacuum pump production line: software for functional test station - pump firmware and parameter upload, parameter testing, vibration measurement, software for leak test, software hi-pot inspection, database application for control, configuration and test result presentation, software for mobile PC stations used by the operators during assembly process.
Schneider Electric a.s.
2011, Písek, Czech Republic, Contactor Test Stand, Test machine for testing of electro-mechanical contactors. Performs automated tests of mechanical and electrical tests of contactors. Versatile fixing allows testing of various contactor types. Electrical and mechanical (contactless laser distance sensor) detection of switching. Measurement ranges 85 mA - 65 A, 25 V - 700 V. Data logging, graphical output.
Secop s.r.o.
2011, Zlaté Moravce, Slovakia, Test stand for insepction of compressors and run-up elements, Inspection equipment for functional testing of compressors and run-up elements. Stand consists of pneumatic and electrical part. High flexibility of the power source and the measurement circuits allows configuration according to customer needs - functional testing (of compressors, run-up relais, ePTC elements, etc.) and data logging for further processing. Pneumatic parameters: compressor suction pressure measurement (0-2bar) , suction pressure control (0-2bar), output pressure (0-20bar), compressor displacement (200l/min). Electrical parameters: power source selection (0-300VAC/45-65Hz, 0-60VDC), resistance measurement (0-3Mohm), current and voltage measurement sampling (10kS/s), high voltage test (4kV, 10mA), vibration measurement.
Siemens s.r.o., o.z. Elektromotory Mohelnice
2011, Mohelnice, Czech Republic, Mobile Wireless Temperature Measurement Systems, Mobile systems for temperature measurement (TC) and general purpose analog input acquisition. Measurement data transmittet via WiFi to the control PC. Electrical isolation of acquisition and processing unit. Software for display and storing of measured data.
Siemens, s.r.o., o.z. Elektromotory Mohelnice
2011, Mohelnice, Czech Republic, Asynchronous Motor Testing Laboratory Equipment, Complete delivery of electrical, mechanical, measurement and control equipment of four test stand for testing of asynchronous motors up to 50 kW. Delivery of static power supply with sin output voltage up to 200kVA, 250-400-690-850V, delivery of motor shaft and load for testing in noise chamber, delivery of adjustable table for motor fixing, delivery of vibration measurement system, machine vision system with thermal camera etc. Single software control application integrates measurement, control, data logging and processing according to ČSN EN 60034-2-1, IEEE 112, EN 60034-2, CSA-C390.
Swoboda CZ s.r.o.
2011, Jihlava, Czech Republic, Lighting for Machine Vision System for Soldering Inspection, Design and manufacturing of dome illumination for machine vision system for automated soldering inspection.
Visteon - Autopal s.r.o.
2011, Rychvald, Czech Republic, Machine Vision, Measurement and Inspection Systems for Car Headlamp Production Line, Machine vision and measurement systems for car headlamp inspection during assembly, versatile manufacturing line for several projects (exchangeable fixtures), halogen and bi-xenon lamp versions, testing of LWR, AFS, part presence etc.
Visteon - Carplastic S.A.
2011, Monterrey, México, Test and assembly mechines of car headlamp projector units, Machine for final tuning of cut-off line color and gradient, fixture for adjusting of position of lamp and reflector and EOL tester for final test of complete assembly.
Automotive Lighting s.r.o.
2010, Jihlava, Czech Republic, Coating Presence Detection System, Inspection system for detection of presence of external hard coat and internal anti-fog coating on car headlamp lens. Spectrometric probe with micro-motion feature for multi-point inspection. Industrial compact PC-based control system with isolated IO communication with external technology.
AVX Czech Republic s.r.o.
2010, Lanškroun, Czech Republic, Robot Stand for Capacitor Laser Welding, Machine for fully automated laser welding of capacitor body and cap. Adjustable welding angle. Replaceable robot grippers for various product types. Machine vision system for robot positioning, weld inspection and part placement.
Behr Ostrava s.r.o.
2010, Ostrava, Czech Republic, Machine Vision System for Part Recognition, Machine vision system based upon smart camera NI 1722. Detection of faulty part in subassembly before pressing. Delivery of compact system including electrical installation, controls and communication with the press.
Continental Automotive Systems Czech Republic s.r.o.
2010, Frenštát p.R., Czech Republic, Machine Vision System for Heat-Conducting Paste, Machine vision system for inspection fo presence and quantity of heat-conductive paste on a metal part. Custom LED dome illumination, compact vision system NI CVS-1454. Control software NI Vision Builder for Automated Inspection.
Danfoss Compressors, spol. s r.o.
2010, Zlaté Moravce, Slovakia, Test Machine for Inspection of Compressors, Fully automatic inspection machine located in a production line. Testing visual parameters of compressors (part presence and correctness, part and label position, etc.). Machine vision system with 5 GigE Basler cameras, custom LED panel and projector illumination. PC based machine vision system, control of mechanics via Festo CPX terminal.
ON SEMICONDUCTOR CZECH REPUBLIC, s.r.o.
2010, Rožnov p.R., Czech Republic, Custom Miniature Lighting for Machine Vision System for Chip Inspection, Design, development and manufacturing of 30 pcs of miniature LED illumination rings for machine vision system for semiconductor manufacturing. High temperature tolerance. Built into existing machines.
ON SEMICONDUCTOR CZECH REPUBLIC, s.r.o.
2010, Rožnov p.R., Czech Republic, Machine Vision System for Wafer Inspection, Machine vision system for inspection of wafer position and quality (scratches, stains, defects) in a machine for vacuum implantation of thin layers. Single-purpose machine vision system with unique lighting and angle camera for mounting into existing machines.
AISIN EUROPE MANUFACTURING CZECH s.r.o
2008, Písek, Czech Republic, Software Application for Production Monitoring, Software application for production data monitoring (National Instruments Compadt FieldPoint distributed data acquisition system), data processing and display. Developed in NI LabVIEW.
Automotive Lighting s.r.o.
2008, Jihlava, Czech Republic, Machine Vision System for Glass Identification in Paintshop, Machine vision system for presence detection and type recognition of car headlamp cover glass, the glass is positioned on a conveyor in paintshop, the system output deactivates painting process in case the conveyor is empty, the system also counts products and identifies product types
Continental Automotive Czech Republic s.r.o.
2008, Brandýs nad Labem, Czech Republic, Test Machine for Display Defects Measurement, Measurement of defective (dark or bright) dots on car dash-board device displays, measurement of dots from 20 um, two-axes linear travel with exchangeable fixtures for various devices, CAN communication with the dash-board device.
Continental Automotive Systems Czech Republic s.r.o.
2008, Frenštát pod Radhoštěm, Czech Republic, Machine Vision System for Wound Wire Inspection, Machine vision system based on National Instruments NI 1722 smart cameras, inspection of a correct position of a wire wound around an electronic component terminal before welding.
LaborTech s.r.o.
2008, Opava, Czech Republic, Machine Vision System for Automatic Hardness Testing, Machine vision system which takes an image and automatically calculates hardness of tested material. Based on National Instruments CVS-1454 compact vision system and NI Vision Builder for Automated Inspection.
MES S.A.
2008, Stabio, Switzerland, Machine for Functional Test and Measurement of Car Headlamp Shutter Assembly, Indexing table machine for functional test of bi-functional car headlamp module, dimension measurement of shutter and holder, testing of high and low beam end stop shield position, solenoid current measurement, laser part marking, 3-axes manipulator for parts sorting, machine and vision application control with National Instruments LabVIEW.
THEVIA s.r.o.
2008, Rožnov pod Radhoštěm, Czech Republic, Machine Vision System for Fuse Strip Inspection, Line scan camera machine vision system for checking of position of a fuse strip on a lead frame. The lead frame carries SMD electronic components during production and testing.
Welco Technology (SuZhou) Ltd.
2008, SuZhou, China, Test Machine for D1 Discharge Lamps, Design and delivery of test machine for end-of-the-line test of automotive D1 discharge lamps. Radiospectrometric measurements of emitted light, measurement of electrodes position, arch measurement, outer dimension measurements, ink-jet marking.
AVX CZECH REPUBLIC s.r.o.
2007, Uherské Hradiště, Czech Republic, Machine Vision System for Chip Inspection, Upgrade of chip inspection machine (PORARIS) - new machine vision system, high speed inspection (10 pcs/s), polarized lighting and imaging system for inspection of dimensions and detection of plated capacitor terminations, mechanical and electrical upgrade of an existing machine, precise triggering with real-time HW and SW (LabVIEW RT).
Hayes Lemmerz Alukola, s.r.o.
2007, Ostrava, Czech Republic, Machine Vision Systems for Wheel Disk Identification, Delivery of machine vision systems for wheel disk identification in lug discarding press, machine vision system controlled by a panel PC, communication with control system via National Instruments USB DIO module, wheel disk identification and corresponding discarding tool selection, semi-automatic teaching
Koito Czech, s.r.o.
2007, Žatec, Czech Republic, Machine vision systems for car headlamp adjusting, Machine vision systems for adjusting of car headlamps in the assembly process (preaiming), final testing (photometry), completeness inspection, assembly inspection. Communication with the lamp ECU through LIN or CAN interface.
Thevia s.r.o.
2007, Rožnov pod Radhoštěm, Czech Republic, Machine Vision Systems for Weld Joint Inspection and Part Inspection, Delivery of machine vision systems for welding machines (welding of car A/C pipes), detection of welded nut, inspection of weld joint (deformation, shape etc.), unique laser lighting system positioned on rotary table, high speed imaging (70 imgs/s), digital IEEE-1394 (FireWire) Basler cameras
Automotive Lighting s.r.o.
2006, Jihlava, Czech Republic, Machine vision system for detection of label on lamp cover glass, Machine vision system based on National Instruments CVS-1454 checking presence of a lable on lamp cover glass after lamp assembly.
Automotive Lighting s.r.o.
2006, Jihlava, Czech Republic, Tester for burn-in test of car xenon head lamps, Measurement and analysis of current during startup of discharge lamp, communication with lamp control unit via LIN and CAN.
Automotive Lighting s.r.o.
2006, Jihlava, Czech Republic, Machine vision system for ALV/AFS and LWR test of car headlamps, Inspection system monitoring position of PES unit within car headlamp body.
Public Transportation Company Ostrava, a.s.
2006, Ostrava, Czech Republic, DC motors test-room technology upgrade, Test software have been modified and extended in order to improve safety and methodology of test execution.
DYNEX s.r.o
2006, Praha, Czech Republic, Dynablot - firmware and control system for blood investigation machine, Development of control electronics and software for blood investigation machine used in blood transfusion stations. The machine is controlled by PIC18F microprocessor (Microchip Technology Inc.) and can be configured and controlled from a PC.
EGC Service, s. r. o.
2006, České Budějovice, Czech Republic, ENA - ELCOM Network Analyzer, ENA - ELCOM Network Analyzer ENA500
Energetika KLADNO, s. r. o.
2006, Kladno, Czech Republic, ENA - ELCOM Network Analyzer, ENA - ELCOM Network Analyzer ENA500
Jenoptik
2006, Germany, ImagePro Driver for FireWire cameras C14+ a MFScan, The driver is developed in Visual C++.
Kiekert-CS, s.r.o.
2006, Přelouč, Czech Republic, Machine vision system for dimension measurement, Delivery of high-resolution Basler digital camera mounted on a Carl Zeiss microscope, delivery of National Instruments Vision Builder for Automated Inspection, configuration of inspection steps, and complex training.
KS Klima-Service a.s.
2006, Dobříš, Czech Republic, Pressure chamber for measurement of pressure drop on air filters, Complex delivery of laboratory equipment consisting of pressure chamber for measurement of pressure drop on air filters including measuring instruments, orifice concentric and software application for control of the test process and processing of the acquired data.
Panasonic Electronic Devices Slovakia s.r.o.
2006, Trstená, Slovakia, Machine vision system for display inspection, Delivery of machine vision system for inspection of home appliances displays.
Schneider Electric, s.r.o.
2006, Pisek, Czech Republic, Design and Manufacturing of machine for testing contactor coils, The tester is based on virtual instrumentation concept. Its mechanical part serves to insert tested coils, move coils between individual testing positions, bend coil contacts and sort coils after testing. Winding withstand voltage test (HV surge generator 6 kV) and winding resistance tests are performed. Tester automation and measurement parts are built from National Instruments componets. The software application of the tester is written in LabVIEW. The tester is testing approx. 30 different types of coils.
Siemens Automobilové systémy s.r.o.
2006, Frenštát p. R., Czech Republic, Machine for Vacuum Tightness and Dimension Inspection (Car Key), Design and delivery of test machine - test of vacuum tightness and dimension measurement of plastic car key (Volvo), measurement resolution 0,01 mm
Siemens Automobilove systemy, s.r.o.
2006, Frenstat pod Radhostem, Czech Republic, Redesign of test sequence for testing electronic module Opel CCK on Agilent TS-5400 series tester, Within this project an existing test sequence was redesigned in order to work with new version of both the tester and tested module. The test sequences were redesigned in TestExecSL. The purpose of the test sequence was to perform black-box test of functionality of the module. Cabling specification for wiring beween test module adapter and the tester was created as a part of the project. Based on this specification necessary cabling was made.
Siemens Automobilove systemy, s.r.o.
2006, Frenstat pod Radhostem, Czech Republic, Creating of test sequence for testing electronic module Renault BCM X91 on Agilent TS-5400 series tester, The test sequences were developed in TestExecSL. The purpose of the test sequence was to perform black-box test of functionality of the module. Cabling specification for wiring beween test module adapter and the tester was created as a part of the project. Based on this specification necessary cabling was made.
Siemens Automobilove systemy, s.r.o.
2006, Frenstat pod Radhostem, Czech Republic, Creating of test sequence for testing electronic module Smart W451 IMMO on Agilent TS-5400 series tester, The test sequences were developed in TestExecSL. The purpose of the test sequence was to perform tests of individual components of the module as well as to perform black-box test of functionality of the module. Cabling specification for wiring beween test module adapter and the tester was created as a part of the project. Based on this specification necessary cabling was made.
STMicroelectronics, s.r.o.
2006, Prague, Czech Republic, Design and Manufacturing of custom hybrid ASIC prototypes, The tester is based on virtual instrumentation concept. Measuring instruments come from national Instruments, Agilent Technologies, Tektronix a Stanford Research Systems. Instruments are mounted into 19\\\" rack. Tested unit connects to the tester via mass interconnect console from Virginia Panel Corp. The tester is using LabVIEW and TestStand development systems for test applications development. A concise self-test software routine has been developed as a part of delivery.
VALEO AUTOKLIMATIZACE, s.r.o.
2006, Rakovník, Czech Republic, Upgrade and extension of machine vision system for inspection of car A/C units, Supply of new cameras and lighting, extension and configuration of camera tests in National Instruments Vision Builder for Automated Inspection.
Visteon - Autopal s.r.o.
2006, Rychvald, Czech Republic, Inspection system for quality testing of bright-to-dark line of car fog lamp, Machine vision system for inspection of the dark-bright border line, detection of faults in the dark area.
Visteon - Autopal, s.r.o.
2006, Hluk, Czech Republic, Refrigerant Data Collection and Processing Unit, Design and manufacturing of unit performing sensor data collection over HART protocol and calculation of control action for supervising control system of calorimeter ERG. Hardware is built from single-board computer and a set of HART modems. Software application was developed in LabVIEW from National Instruments.
Aeroflex Inc.
2005, Stevenage, UK, Instrument Driver for IFR 3900 Test Set, Large VXI Plug&Play Instrument Driver for IFR 3900 Series TETRA Digital Radio Test Set.
Austin Detonator s.r.o.
2005, Vsetín, Czech Republic, Measurement of equivalent initiatory forcibility of detonators in water tank according to ČSN EN 13763 – 15, Design and development of software application for measurement and analysis of equivalent initiatory forcibility of detonators in water tank according to ČSN EN 13763 – 15. The software calculates equivalent surge energy and equivalent bubble energy.
Automotive Lighting s.r.o.
2005, Jihlava, Czech Republic, Vision Systems for Car Headlamp Adjustment, Machine vision systems controlled by an industrial PC or compact vision system CVS-1454, communication with the machine control PLC (Bosch CL 201 with oper. panel BT5) by means of Bosch WinTools (RS-232 or Ethernet), digital IEEE-1394 (FireWire) cameras Basler A601f, on-line analysis of the dark-bright border, analysis of relative light intensity in specified areas, software developed in LabVIEW Real-Time.
Autopal - Visteon, s.r.o.
2005, Hluk, Czech Republic, Condenser Calorimeter, Design and manufacturing of measurement and control parts of car air conditioning condenser calorimeter. Hardware is based on National Instrument components: PXI, SCXI, Compact FieldPoint. Calorimeter software was developed in LabVIEW Real Time. The system processes approx. 300 digital and 40 analog inputs/outputs. Control loop period is 1 second, sampling period of measured signals is 1 kHz. Control algorithm is based on using tabelled parameters of refrigerant media. This yields high precision of control process.
Autopal, s.r.o. / Visteon Exterior Systems
2005, Nový Jičín, Czech Republic, Machine for Inspection and Adjustment of Car Headlamps, Design and delivery of a machine for testing and manual adjustment of car headlamp ED module. Preassure air and electric equipment, projection chamber with lens and mirror optical system, full PC machine control, camera optical system (brightness in the dark field, adjustment and test of dark-bright interface etc.).
AVX Czech Republic, s.r.o.
2005, Uherské Hradiště, Czech Republic, SMD film chip capacitors sorting machine, Design, assembly and delivery of the complete machine for sorting the SMD film chips. Chips are fed into the machine from its vibration bowl and linear vibration feeder. In the machine the chips are being inserted into a rotating carousel where chips a sequentially charged, measured and discharged in individual positions. After passing all measuring positions in
carousel, chips are ejected and thrown into sorting boxes depending on faults during measurement or into a box for good parts. Highest test voltage is 1250 V, the range for measured capacity is 100 pF to 5 uF, leakage range is 100 MOhms to 1000 GOhms. Machine speed is approx. 6000 chips per hour.
E.ON Česká republika, a.s.
2005, České Budějovice, Czech Republic (Power Distribution Company), Stationary monitoring with BK-ELCOM, ELCOM, a.s., was awarded a contract to deliver stationary power quality analyzers for all tranfer points within the distribution company E.ON Česká republika, a.s. Transfer points were equipped with BK-ELCOM type ENA440. Power analyzer ENA440 is now installed in all regional transfer points of E.ON in the Czech Republic.
ČEZ Logistika, s.r.o.
2005, Praha, Czech Republic (Power Distribution Company), Stationary monitoring with BK-ELCOM, ELCOM, a.s., was awarded a contract to deliver stationary power quality analyzers for all tranfer points within the distribution company ČEZ Distribuce, a.s. Transfer points were equipped with BK-ELCOM type ENA440. Power analyzer ENA440 is now installed in all regional transfer points of the ČEZ group in the Czech Republic.
EGC, EnerGoConsult ČB, s.r.o.
2005, České Budějovice, Czech Republic, Power Network Analyser BK-ELCOM, Power Network Analyser BK-ELCOM
Elektrizace železnic, a.s.
2005, Praha, Czech Republic, Power Network Analyser BK-ELCOM, Power Network Analyser BK-ELCOM
LEM Instruments
2005, Vienna, Austria, PowerVIEW 4000, Sophisticated, scalable graphical application satisfying all user\\\'s needs for work with NORMA 3/4/5000 power analyzers. Modular architecture allows adding of new features using plug-in technology. Compared to NormaX, PowerVIEW allows user to show data in graphs, communicate with the instrument via GPIB, RS-232, Ethernet or USB interface. Advanced data export capabilities are provided.
Media Cybernetics
2005, Silver Springs, USA, Driver for analog framegrabbery, Complete acquisition driver for Image-Pro supporting Integral Technologies\\\\\\\\\\\\\\\' Flasbus Spectrim and Spectrime Lite cards using Image-Pro DDK and Flasfbus SDK.
Pražská vodohospodářská společnost, a.s., Energocentrum Sojovice
2005, Prague, Czech Republic, Extension of Water Treatment and Power Supply NI Lookout™ SCADA Application, Control PC with NI Lookout SCADA, process and alarm monitor, secondary PC for communication with distributed monitoring and control system WSR3000 (Rittmeyer), communication and data exchange between applications running in Karany and Sojovice control rooms, client applications for monitoring of all data, data archiving on local and network storage devices.
Precision Digital
2005, Natick, Massachussets, USA, Instrument Driver for panel meter PD765, Development of the LabVIEW Plug And Play instrument driver for the panel meter PD765.
QATAR Petrochemical Company Ltd.
2005, Messaied Industrial City, State of Qatar, Design, manufacturing and commissioning of High Speed Datalogging System (HSDL), The purpose of the HSDL is to monitor operation of two Low Density Polyethylene reactors. The HSDL is acquiring 140 voltage, current and thermocouple channels and 60 digital channels at a sampling rate 1 kHz per channel. It also detects configurable events on any channel or channels combination.
The core of HSDL is built around National Instruments products. The HSDL is using three SCXI signal conditioning chassis and one fully loaded PXI data acquisition system. The data acquisition sample clock is generated by PXI-6608 Timing module synchronized with GPS. The acquired data are stored on a Hewlett&Packard RAID5 server.
The HSDL software is written in LabVIEW. It allows to configure all features of HSDL, performs acquisition, event detection and processing and view data in many different forms for easy analysis.
Rohde&Schwarz
2005, Munich, Germany, GB2PP Parser, The GB2PP parser was created as a part of an instrument firmware. The instrument then uses this protocol to communicate with a supervising information and control system. The parser was developed using UML modeling tools from I-Logix. The implementation of the parser was done in C programming language.
Rohde&Schwarz GmBH.
2005, Muenchen, Germany, Service Application for air traffic control ZS 4200 series radio, Within the framework of this project a design of application on the base of customer specification and UML model of radio firmware was performed. After customer evaliation and confirmation of the design, an implementation was performed. The software was implemented in LabVIEW from National Instruments. The result was an independent software application which is used by service technicians during installation, configuration and maintenance of the radios.
Rohde&Schwarz GmBH.
2005, Muenchen, Germany, SFU Instrument Driver, Development of instrument driver for SFU Broadcast test System. The instrument driver is based on a new attribute model concept. This instrument driver is designed to be used in National Instruments LabVIEW and LabWindows/CVI development systems as well as in many other environments capable of calling into DLLs.
Rohde&Schwarz GmBH.
2005, Muenchen, Germany, FSx Instrument Driver, Rewrite of instrument driver accordint to latest instrument driver standards and latest instrument firmware.
Rohde&Schwarz GmBH.
2005, Muenchen, Germany, SMU/SMA/AFQ Instrument Driver, Extensive upgrade of instrument drivers for the family of generators SMU/SMA/AFQ in order to support latest instrument firmware.
Rohde&Schwarz GmBH.
2005, Muenchen, Germany, CMU Instrument Driver, Extensive upgrade of instrument drivers for mobile wireless technology tester CMU in order to support latest instrument firmware.
Siemens Automobilové systémy a.s.
2005, Frenštát pod Radhoštěm, Czech Republic, Tester of pin position in a connector, Delivery of complete test machines for inspection of pin position in a connector. Unique LED illumination, position detection by means of machine vision system.
Siemens Automobilové systémy a.s.
2005, Frenštát pod Radhoštěm, Czech Republic, Machine vision system for label quality inspection, Machine vision system based on National Instruments CVS and digital high resolution IEEE-1394 Basler camera used for label printing inspection. Application of OCR (optical character recognition) and OCV (optical character verification).
Siemens Automobilove systemy, s.r.o.
2005, Frenstat pod Radhostem, Czech Republic, Creating of test sequence for testing electronic module IRX on Agilent TS-5400 series tester, The test sequences were developed in TestExecSL. The purpose of the test sequence was to perform tests of individual components of the module as well as to perform black-box test of functionality of the module. Cabling specification for wiring beween test module adapter and the tester was created as a part of the project. Based on this specification necessary cabling was made.
Siemens Automobilove systemy, s.r.o.
2005, Frenstat pod Radhostem, Czech Republic, Redesign of test sequence for testing electronic module Nissan MM Key on Agilent TS-5400 series tester, Within this project an existing test sequence was redesigned in order to work with new version of both the tester and tested module. The test sequences were redesigned in TestExecSL. The purpose of the test sequence was to perform tests of individual components of the module as well as to perform black-box test of functionality of the module. Cabling specification for wiring beween test module adapter and the tester was created as a part of the project. Based on this specification necessary cabling was made.
Siemens Automobilove systemy, s.r.o.
2005, Frenstat pod Radhostem, Czech Republic, Redesign of test sequence for testing electronic module Mitsubishi Z Car Key on Agilent TS-5400 series tester, Within this project an existing test sequence was redesigned in order to work with new version of both the tester and tested module. The test sequences were redesigned in TestExecSL. The purpose of the test sequence was to perform tests of individual components of the module as well as to perform black-box test of functionality of the module. Cabling specification for wiring beween test module adapter and the tester was created as a part of the project. Based on this specification necessary cabling was made.
Siemens Automobilové systémy, s.r.o.
2005, Frenštát p.Radhoštěm, PC software and firmware for oil level sensors, Development of PC software application for configuration, measured value readout and firmware upload of oil-level sensors. The PC software application was developed in LabWindows/CVI development system.
Second part of the project was firmware development for ADuC 841 controller which is at the core of oil-level sensor. The developed firmware supports oil-level measurement, PWM output of measured value and firmware upload. The firmware was developed in Microvision development system from Kiel.
Siemens Elektromotory, s.r.o.
2005, Frenštát pod Radhoštěm, Czech Republic, Delivery of the power analyzer LEM NORMA, Delivery of the power analyzer LEM NORMA 4000 including GPIB interface card and Process Interface card. A part of the delivery has been a complete software package for LEM power analyzers that consists of instrument driver, Active X component Norma X, simple application Norma Monitor and full version of PowerVIEW, a soft-front panel application for LEM power analyzers. All the software has been developed by EL
COM, a.s. exclusively for LEM.
Siemens elektromotory, s.r.o.
2005, Frenstat pod Radhostem, Czech Republic, Design and Manufacturing of asynchronous motor stator windings tester, The tester is based on virtual instrumentation concept. Measuring instruments come from National Instruments and Agilent Technologies. The tester performs measurement of winding resistance with 0.1% precision, high-voltage surge test at 4 kV and high-voltage withstand test of thermoelements inserted into widing. Tester throughput is 120 stator windings per shift. Software application of the tester is written in LabVIEW and LabVIEW Real-Time. The tester is on-line parametrized from company information system SAP on the base of barcode label on individual stator windings. The test results are stored in SAP. The tester is capable of testing 50 different types of stator windings of various sizes and connections.
Siemens elektromotory, s.r.o.
2005, Frenstat pod Radhostem, Czech Republic, Design and Manufacturing of asynchronous motor end-of-line tester, The tester is based on virtual instrumentation concept. Measuring instruments come from National Instruments, Agilent Technologies nad LEM Instruments. Motor power supply with filtered sine output is custom made by ELCOM, a.s. Tester is performing short and open circuit test of the motors with 0.2% precision of electrical measurements, isolation resistance measurement, winding resistance measurement with 0.1% precision and vibration measurement. It also provides high-voltage withstand test up to 4 kV. The tester throughput is 90 motors per shift. Software application of the tester is written in LabVIEW and LabVIEW Real-Time. The tester is on-line parametrized from company information system SAP on the base of barcode label on individual motors. The test results are stored in SAP. The tester is capable of testing 200 different types of motors of various sizes, connections and additional elements configurations.
Siemens elektromotory, s.r.o.
2005, Frenstat pod Radhostem, Czech Republic, Design and Manufacturing of tester of tooled surfaces dimensions, The tester is based on virtual instrumentation concept. Measuring instruments come from National Instruments and Tesa SA. The tester performs measurements of deviation of dimensions of tooled motor components. Software application of the tester is written in LabVIEW. The tester is on-line parametrized from company information system SAP on the base of barcode labels. The test results are stored on-line in SAP.
Siemens VDO Automotive, s.r.o.
2005, Frenštát pod Radhoštěm, Modification of the testbench for Nissan SEC-E, Porting of the test software from the original old testing platform to a new Agilent TS-5400 platform. The subject of testing was module SEC-E for control of certain subsystems of the Nissan cars. The test software was created in Agilent TestExec SL from Agilent Technologies.
UNIGEO, a.s.
2005, Ostrava, Czech Republic, Design of custom gear box for shear tester, The goal was to design a gear box for unidirectional shear tester in soil testing laboratory. The design was based on design of an existing very old gear box. The gear box is driver by an asynchronous motor with frequency converter, on the output of the gear box there are two linearly moving bars which move the frames holding the soil samples. The ratio of the gear box is approx. 1 rev/mm.
VALEO AUTOKLIMATIZACE, s.r.o.
2005, Prague, Czech Republic, Development of the test set consisting of electronic modules, camera and testing software for HVAC control panels X44 and PL3, Development of the test set consisting of electronic modules, camera and testing software for testing control panels for car heating, ventilation and airconditioning control panels X44 and PL3. The electronic test modules are using a universal sandwich design with two PCBs, one on the top of the other. Channels are grouped according to the functionality, individual groups support various combinations of measuring voltage, current (both Amps and uAmps), frequency and voltage or frequency generation. Channels are using semiconductor switches or reed relays to create different measuring schemes on multifunction channels. The camera performs tests of the display and illumination elements on the panel surface. The software application is running on the tester PC and is developed in TestStand, some libraries developed in LabWindows/CVI and camera tests written in LabVIEW.
VALEO AUTOKLIMATIZACE, s.r.o.
2005, Prague, Czech Republic, Training focused on using industrial vision systems for component testing in automotive industry, The training was tailor-made for specific applications at customer production site. The training included introduction and hands-on activity to industrial vision hardware, introduction to image procesing and analysis, NI Vision Builder for Automated Inspection hands-on training, interactive demonstration of building specific customer application.
Valeo Autoklimatizace, s.r.o.
2005, Rakovník, Czech Republic, Delivery of backup computer for tester of HVAC modules, Backup computer contains National Instruments plug-in boards, TestStand based testing software is preinstalled on this PC.
Valeo Autoklimatizace, s.r.o.
2005, Rakovník, Czech Republic, I2C komunikátor, Communicator for controlling of illumination of HVAC control panels was designed within this project. The controller was based on a PIC microcontroller.
Vojenská akademie v Brně
2005, Brno, Czech Republic (University), Power Network Analyser BK-ELCOM, Power Network Analyser BK-ELCOM
VSE (Východoslovenská energetika), a.s.
2005, Košice, Slovakia (Power Distribution Company), Power Network Analyser BK-ELCOM, Power Network Analyser BK-ELCOM
ZČE (Západočeská energetika), a.s.
2005, Plzeň, Czech Republic (Power Distribution Company), Stationary monitoring with BK-ELCOM, Stationary monitoring with BK-ELCOM
ZČE (Západočeská energetika), a.s.
2005, Plzeň, Czech Republic (Power Distribution Company), Power Network Analyser BK-ELCOM, Power Network Analyser BK-ELCOM
AB Elektro, s.r.o.
2004, Řenče, Czech Republic, Stationary monitoring with BK-ELCOM, Stationary monitoring with BK-ELCOM
Abu Dhabi International Airports, Serco/IAL Ltd.
2004, Abu Dhabi, United Arab Emirates, System for monitoring of air traffic control equipment, Delivery and installation of a switch board with FieldPoint modules and two PCs for on-line monitoring of inputs from ATC and reset of remote devices.
Autel, a.s.
2004, Třinec, Czech Republic, Power Network Analyser BK-ELCOM, Power Network Analyser BK-ELCOM
Brano, a.s.
2004, Hradec nad Moravici, Czech Republic, Vision Systems for Inspection of Headlamp Parts, Delivery of vision systems for measurement of dimensions of mechanical parts for car headlamp. Implementation of vision inspection steps into TestStand™.
Delnet s.r.o.
2004, České Budějovice, Czech Republic, Power Network Analyser BK-ELCOM, Power Network Analyser BK-ELCOM
Dopravní podnik Ostrava
2004, Ostrava, Czech Republic, Assistence to tuning a PLC software at test lab for DC tram motors, Assistence in design of switching sequences and control algorithms for individual steps of the test of the DC tram motors. The programming was done on PLC Simatic. The control application of the testing lab is developed in LabVIEW from National Instruments and runs on a control PC of the test lab.
EGE, s.r.o.
2004, České Budějovice, Czech Republic, Power Network Analyser BK-ELCOM, Power Network Analyser BK-ELCOM
EMBRACO SLOVAKIA s.r.o.
2004, Spišská Nová Ves, Slovakia, Laboratory for refrigerator appliances testing, Design and delivery of measurement and control system for laboratory for refrigerator appliances testing. Electrical measurement by means of BK-ELCOM analyzer, temperatures and pressures by National Instruments FieldPoint. Design and delivery of unique power converters. Control switch board with industrial PC.
Embraco Slovakia s.r.o.
2004, Spišská Nová Ves, Slovakia, Stacionární monitoring systémem BK-ELCOM, Laboratory for refrigerator appliances testing - Design and delivery of measurement and control system for laboratory for refrigerator appliances testing. Electrical measurement by means of BK-ELCOM analyzer, temperatures and pressures by National Instruments FieldPoint. Design and delivery of unique power converters. Control switch board with industrial PC.
Energetika Vítkovice, a.s.
2004, Ostrava, Czech republic, Stationary monitoring with BK-ELCOM, Stationary monitoring with BK-ELCOM
Kiekert-CS, s.r.o.
2004, Pardubice, Czech Republic, Machine vision systems for assembly line of car lock, Delivery of Basler cameras and software applications for part presence inspection during assembly of car locks.
Kimberly-Clark, a.s.
2004, Litovel, Czech Republic, Vision Systems for Tampons Presence Inspection, Vision inspection systems, which analyze laser beam reflection in a box full of tampons. The system is based on compact unit CVS-1454. Configuration via text-based ini files downloaded into the CVS remotely via FTP.
LEM Instruments
2004, Wien, Austria, Instrument-Side Ethernet+GPIB Cards for Standalone Instrument, This card is built on the design of already developed GPIB-only card. The card combines GPIB and Ethernet communication. Only one of the interfaces is active at a time. The ethernet part uses Realtek RTL8201BL ethernet transmitter and chip with hardwired implementation of the TCP/IP protocol from Wiznet. The glue logic between Wiznet chip and instrument\'s internal bus is realized using CPLD chip. Software driver for the interface cards was developed for the operating system MQX of the instrument. The driver supports communication with the Wiznet chip using PIO in both directions. The driver is a part of the instrument firmware. Maximum transfer rate of this GPIB interface is 1,5 MB/sec. The card was developed in 2003, since then over 100 cards have been manufactured and delivered.
LEM Instruments
2004, Wien, Austria, Instrument-Side USB+Ethernet Cards for Standalone Instrument, This card is built on the design of already developed Ethernet+GPIB card. The card combines USB and Ethernet communication. Only one of the interfaces is active at a time. The USB part uses FTDI chip FT245B. The communication within the instrument is realized using UART interface and FPGA working as a state machine ensuring data transfers between FIFOs and the USB driver. Software driver for the interface cards was developed for the operating system MQX of the instrument. The driver is a part of the instrument firmware. Maximum transfer rate of this GPIB interface is 800 kB/sec. The card was developed in 2005.
LEM Instruments
2004, Wien, Austria, Instruments-Side GPIB Interface Cards for Standalone Instrument, GPIB interface cards were designed for a new generation of power analyzers from LEM Instruments. Cards have a form of a plug-in card with internal bus connector on one side and the GPIB connector on the other side. Internal bus of the instrument is a 33 MHz, 32-bit bus. The main processor of the instrument is Motorola Cold Fire. The card is designed as 2 sided PCB. GPIB transfers are realized with a GPIB TNT488 ASIC from National Instruments. The glue logic between the instrument’s internal bus and the GPIB chip is realized with CPLDs. Cards are delivered in small sets according to the customer\\\\\\\\\\\\\\\'s request. Software driver for the GPIB interface cards was developed for the operating system MQX of the instrument. The driver supports communication with the GPIB TNT488 chip using PIO, IRQ i DMA in both directions. The driver is a part of the instrument firmware. Maximum transfer rate of this GPIB interface is 1 MB/sec. The card was developed in 2002, since then over 100 cards have been manufactured and delivered.
myonic s.r.o.
2004, Rožnov pod Radhoštěm, Czech Republic, Stand for completion of ball bearings, Design and delivery of a stand for accurate measurement of inner and outer bearing ring, ring matching, automated selection of suitable ball and transportation of the ball to assembly.
National Instruments
2004, Austin, Texas, USA, Instrument Drivers development for National Instruments, ELCOM\\\\\\\\\\\\\\\' instrument drivers development team is the only team outside National Instruments in the world, which is developing instrument drivers directly for National Instruments. Subject of the development are instrument drivers according to latest standards labVIEW Plpug And Play and IVI-C for popular instruments from largest instrument vendors like Agilent Technologies, Tektronix, Fluke, Mettler-Toledo and others. This is a long term and continuous project, there are tens of new or updated instrument drivers released every year.
Olympus
2004, Prague, Czech Republic, Design and manufacturing of illumination rings for microscopes, Design of mechanical and electronic components of illumination ring. The light source on the ring are high power LEDs. Control elements to control light intensity and light direction are designed as microswithes located directly on the upper plate of the ring for users convenience. The rings are used as a light source on stereoscopic microscopes. These illumination rings are deliveded as a complete set with 230VAC power supply.
Olympus
2004, Prague, Czech Republic, Microscope sample feeder, Design and manufacturing of mechanical and electronic components of the feeder and its assembly. The feeder set is mounted on a bottom plate and consists of a rotary magazine with 90 samples, feeding arm for drawing the sample from magazine and inserting it into the microscope\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'s field of view. The feeder is driver by step motors in several axis. For the stepper motors control a custom modular electronic consisting of the control part and the power part has been developed. High level control of the feeder is provided by a PC software application which has been developed in LabVIEW graphical development system from National Instruments.
Protection & Consulting s.r.o.
2004, Brno, Czech Republic, Power Network Analyser BK-ELCOM, Power Network Analyser BK-ELCOM
Robert Bosch, s.r.o.
2004, České Budějovice, Monitoring System, The instrument is based on the concept of compact portable measuring system platform ENA500 which represents a new generation of multichannel measuring system with embedded computer. The protection level is IP 42. Signal connections are mabe using protective screw connectors AMPHENOL C16-1/3 with protection IP 65. Channel type and range is selected using proper pin within the connector. The system connectors of the instrument 1xRS 232, 1xRS232/485, 2xUSB, 1xEthernet a 1xVGA are located under a removable cover on the rear side of the instrument with protection level IP 64. The instrument is processing analog voltage and current signals in frequency range 0..10 kHz. Number of analog inputs is 16. Galvanically isolated and analog-filtered signals signals are digitized by National Inatruments PCI-6040E data acquisition device. The software application of the measuring system is VI Logger from National Instruments.
Rohde & Schwarz GmbH
2004, Munich, Germany, NGM02-K10, Operating software for R&S Current Sniffer based on R&S NGM02 Dual Channel Analyzer/Power Supply. Providing long-term and short-term analysis of current consumption of various DUTs, like mobile phones, PDAs and other battery operating devices
Rohde&Schwarz
2004, Munich, Germany, Instrument Drivers Development for Rohde&Schwarz Instruments, ELCOM, a.s. provides instrument drivers development and maintenance for all instruments designed and made by Rohde&Schwarz. The instrument drivers are being developed in LabVIEW and LabWindows/CVI development systems. Part of the developed instrument drivers are also installers for various target development environments. This is a long term and continuous project, there are tens of new or updated instrument drivers released every year.
SME (Severomoravská energetika), a.s.
2004, Ostrava, Czech Republic (Power Distribution Company), Power Network Analyser BK-ELCOM, Power Network Analyser BK-ELCOM
SME (Severomoravská energetika), a.s.
2004, Ostrava, Czech Republic (Power Distribution Company), Stationary monitoring with BK-ELCOM, Stationary monitoring with BK-ELCOM
Vitkovice vyzkum a vyvoj, s.r.o.
2004, Ostrava, Czech Republic, Vision system for recording and analysis of metal and slag on melted steel surface, Vision system was designed and developed for the purpose of evaluation of image of melted steel surface in caisson.
The system is transfering image from pre-installed analog camera to computer where the image is evaluated and recorded. The evaluation algorithmus is determining time trend in ratio of pure metal surface area versus slag surface area.
VSE (Východoslovenská energetika), a.s.
2004, Košice, Slovakia (Power Distribution Company), Power Network Analyser BK-ELCOM, Power Network Analyser BK-ELCOM
VÚHU, a.s
2004, Most, Czech Republic, Power Network Analyser BK-ELCOM, Power Network Analyser BK-ELCOM
VŠB - Technical University
2004, Ostrava, Czech Republic (University), Power Network Analyser BK-ELCOM, Power Network Analyser BK-ELCOM
ZČE (Západočeská energetika), a.s.
2004, Plzeň, Czech Republic (Power Distribution Company), Stationary monitoring with BK-ELCOM, Stationary monitoring with BK-ELCOM
ABB Elektro, s.r.o.
2003, Košice, Slovakia, Power Network Analyser BK-ELCOM, Power Network Analyser BK-ELCOM
Automotive Lighting s.r.o.
2003, Jihlava, Czech Republic, Tester for Parking Lamp Inspection for BMW E63, Design and delivery of a semi-automatic machine for parts inspection and light parametres testing for automotive headlamps. Two-camera vision system with separatelly controlled LED lights. Washer presence and rotation inspection. Frame color and presence inspection Measurement and evaluation of light parameters of parking lamp rings. Functional test of parking lamp bulb by means of a under- and overcurrent measurement module. Statistics evaluation of inspection process, data storage. Control application developed in graphical programming language National Instruments LabVIEW™.
Autopal, s.r.o. / Visteon Exterior Systems
2003, Nový Jičín, Czech Republic, Automatic Machine for Adjustment of Car Headlamps, Design and delivery of a machine for testing and adjustment of car headlamp ED module. Preassure air and electric equipment, carusel with replacable fixtures, two adjustable motorized screw drivers, projection chamber with lens and mirror optical system, Simatic S7 PLC machine control, communication with the vision system PC via Profibus MPI, 3-camera optical system (brightness in the dark field, adjustment and test of dark-bright interface etc.).
ELCOM, a.s.
2003, , Instrument Drivers, Development of VXIPlug&Play, Visual Basic, AgilentVEE (HP VEE) and IVI instrument drivers for various instrument manufactures in close co-operation with National Instruments. Instrument drivers have been developed for mostly the following types of instruments: digital and vector signal generators, arbitrary waveform generators, patter generators, power sources, oscilloscopes, signal analyzers, power meters, spectrum analyzers, audio analyzers, power reflection meters, vector network analyzers, power analyzers, digital radio testers, I/Q modulation generators, RF and microwave test sets, universal testers, multimeters, calibration sources.
ELCOM, a.s., DVI
2003, Ostrava, Czech Republic, SW Package for Calculation of Faults in Power Distribution Networks, Application Short-circuits offers a simple way to calculate short-circuits in low-voltage, middle-voltage and high-voltage power distribution networks. Setting network configuration. Calculation of faults and data export.
ELMATHERM, s.r.o.
2003, Kroměříž, Czech Republic, Power Network Analyser BK-ELCOM, Power Network Analyser BK-ELCOM
IVAX Pharmaceuticals, s.r.o.
2003, Opava, Czech Republic, Vision System for Inspection of Blister Printing, Design and delivery of PC-based vision system for inspection of presence and duality of blister printing. The vision system is capable to inspect up to 120 blisters per minute while testing 10 cavities on each blister. The system inspects correctness of printing (character absence or damage) and bar code on 240 cavities per minute. Uses IEEE-1394 (FireWire) camera Basler.
IVAX Pharmaceuticals, s.r.o.
2003, Opava, Czech Republic, Power Network Analyser BK-ELCOM, Power Network Analyser BK-ELCOM
LEM Instruments
2003, Vienna, Austria, Instrument Firmware for LEM Instruments Power Analyzers, Analysis, design, implementation, testing, and optimization of firmware sub-systems of a bench top measuring instrument. Routines for control of instrument’s display. Implementation of SCPI commands interpreter (remote control of the instrument). Implementation of hardware drivers (keyboard, flash memory, GPIB (IEEE 488), Ethernet, TCP/IP). Firmware module for printer output (print languages PCL and Epson). Firmware module for firmware upgrade. Development of libraries and tools for testing and debugging of the instrument’s firmware on PC/Windows. Target CPU and OS: Motorola ColdFire, Precise/MQX. Developed in ANSI C with compiler and debugger Diab-Data and Microsoft Visual C++.
Münnerstädter Glaswarenfabrik GmbH
2003, Münnerstadt, Germany, Vision Inspection of Pharmaceutical Needle Rub, Delivery of software application for vision inspection of pharmaceutical needle rub. Delivery of a set of LED lamps.
Münnerstädter Glaswarenfabrik GmbH
2003, Münnerstadt, Germany, Vision Inspection Systems for Pharmaceutical Glass Bottles, Delivery of versatile software application for inspection of dimensions and quality of pharmaceutical glass bottles. Delivery of LED lighting. Vision system for 100% inspection mounted on production lines. Measurement of lenghts, angles, distances diameters etc. on clear glass products. Supported multiple PAL and FireWire (IEEE 1394) cameras, matrix and line-scan cameras.
Rohde & Schwarz GmbH
2003, Munich, Germany, FP2XML Converter, Utility application for conversion between FP (VXI Plug & Play function tree) and XML formats.
SČE (Severočeská energetika), a.s.
2003, Děčín, Czech Republic (Power Distribution Company), Power Network Analyser BK-ELCOM, Power Network Analyser BK-ELCOM
SME (Severomoravská energetika), a.s.
2003, Ostrava, Czech Republic (Power Distribution Company), Power Network Analyser BK-ELCOM, Power Network Analyser BK-ELCOM
Transco
2003, Abu Dhabi, United Arabian Emirates (Power Distribution Company), Stationary monitoring with BK-ELCOM, Stationary monitoring with BK-ELCOM
Unigeo, a.s.
2003, Ostrava, Czech Republic, Soil Mechanics Laboratory Automation, Shear characteristics and compressibility of soils according CSN EN 72 1027, CSN EN 72 1030, CSN 72 EN 1031 standards. Independent parallel operation of a set of eight oedometers, one direct shear tester and one triaxial shear tester. Controlled parameters: pressure up to 10 atm, displacement speed 0.002 - 5 mm/min. Measured parameters: displacement (specimen thickness) with precision of 0.001 mm, force up to 5 kN. Duration of measurement on one specimen tens of minutes up to 7 days. Sample rate in seconds. Automated switching of pre-configured modes during the measurement. Automated termination of the measurement after the conditions specified in EN CSN standards are met. Automated calculation of the soil characteristics from the measured data. Saving of the measured and calculated data and its retrieval and viewing. Protocol printing nad saving in PDF format. Data backup on a dedicated computer within the intranet. Software application running on the control PC developed in LabVIEW graphical development system from National Instruments. Soil testers were equipped with digital dial gauges SYLVAC and force transducers Megatron. All transducers were calibrated at accredited calibration labs UNIMETRA a TZÚS. Individual testers controlled with AMIT control system from AMIT s.r.o. The control PC communicates with AMIT control system via RS-485 interface. Design, manufacturing and installation of electrical and pressed-air compartments in co-operation with partner company TEMEX, s.r.o. Replacement of an out-dated DC drive of the direct shear tester with an asynchronous drive using Siemens motor and Mitsubishi converter.
Výzkumný ústav pro hnědé uhlí, a.s.
2003, Most, Czech Republic, Power Network Analyser BK-ELCOM, Power Network Analyser BK-ELCOM
ZČE (Západočeská energetika), a.s.
2003, Plzeň, Czech Republic (Power Distribution Company), Stationary monitoring with BK-ELCOM, Stationary monitoring with BK-ELCOM
ZČE (Západočeská energetika), a.s.
2003, Plzeň, Czech Republic (Power Distribution Companyr), Power Network Analyser BK-ELCOM, Power Network Analyser BK-ELCOM
ADWEA (Abu Dhabi Water and Electricity Authority U.A.E.)
2002, Abu Dhabi, United Arabian Emirates (Power Distribution Company), Power Network Analyser BK-ELCOM, Power Network Analyser BK-ELCOM
Atrea, s.r.o.
2002, Jablonec nad Nisou, Czech Republic, Laboratory for Blower and Recuperation Unit Measurements and Testing, Design of pressure chamber, design and delivery of power supply, control and monitoring system (software and hardware). Design and delivery of an unique converter for power supply and control of wide range of 1- and 3 phase blowers. Design and delivery of control switch board comprising of an industrial PC, distributed data acquisition system FieldPoint™ by National Instruments, measuring instruments, converter for secondary blower, and more. Design of pressure chamber including precise measuring instrumentation and converters. Design and development of control SCADA application (automatic/manual run, data acquisition and analysis, data storage). Implementation of advanced mathematic functions for calculation of e.g. p-V diagram and efficiency according to ISO 5801:1997(E).
Dewetron GmbH
2002, Graz, Austria, DEWEScope – SW Application for Dewetron Paper-Less Recorder, Configuration of the instrument\\\\\\\\\\\\\\\'s signal conditioning modules. Voice Assistant. Paper-less recorder and scope in one. Data storage.
Dewetron GmbH
2002, Graz, Austria, Implementation of DAQ-P Modules Support, Development of 32 bit DLL support for configuration and communication
with the DAQ-P modules. Implementation of the DAQ-P modules support into
the DEWESCope software.
Komerční produkt
2002, , Connection Tester CAT-01, Design and delivery of testing machine for automatic testing of connections (cable bundles, switchboards, etc.) Standard setup – 1 to 3 measurement pods TC-01, 512 connection points each, industrial PC, LCD touch panel, keyboard, printer, UPS, all mounted into 19” rack. Minimum setup – notebook, 1 measurement pod (desk top design), 32 to 512 connection points.
LEM Instruments
2002, Vienna, Austria, NormaX Suite, Set of tools and applications for communication with new generation power analyzers Norma. Contains fully featured ActiveX component with graphical user interface used in other applications (NormaMonitor and ExcelNormaMonitor for monitoring and storage of measured data from the instrument). Allows user to communicate with the instrument via serial interface without need of any VISA software library. Contains VXI Plug & Play instrument drivers in C, G and in DLL for use in other product such as Visual Basic.
LEM Instruments
2002, Vienna, Austria, Software application for power analyzers, Development of software applications for remote control of LEM
instruments power analyzers series D 6000 and D 4000.
Massag, a.s.
2002, Bílovec, Czech Republic, Tester for Visual Inspection of Small Mechanical Parts, Design and delivery of fully automatic testing machine. Two-camera vision system for inspection of part dimensions and defects.
Rebon, s.r.o
2002, Teplice, Czech Republic, Power Network Analyser BK-ELCOM, Power Network Analyser BK-ELCOM
Rohde & Schwarz GmbH
2002, Munich, Germany, Applications for Rohde & Schwarz NRT/NRT-Z Power Reflection Meters, Development of NI LabWindows/CVI, NI LabVIEW and HP-VEE applications for forward and reflection RF power measurement.
SME (Severomoravská energetika),a.s.
2002, Ostrava, Czech Republic (Power Distribution Company), Power Network Analyser BK-ELCOM, Power Network Analyser BK-ELCOM
Sokolovská uhelná, a.s.
2002, Sokolov, Czech Republic, Power Network Analyser BK-ELCOM, Power Network Analyser BK-ELCOM
Třinecké železárny, a.s.
2002, Třinec, Czech Republic, Power Network Analyser BK-ELCOM, Power Network Analyser BK-ELCOM
Východoslovenská Energetika, a.s.
2002, Košice, Slovensko (distribuční společnost), Power Network Analyser BK-ELCOM, Power Network Analyser BK-ELCOM
Technical University
2002, Brno, Czech Republic, Dynamometer Laboratory Testing Stand, Complex reconstruction of laboratory testing stand for automotive engine testing, electric motor testing, and other speed and torque applications. New control panel, PLC, GUI application with dual LCD. For laboratory purpose operation possible via mechanical switches and levers as well as via PC and its GUI. Low-level machine control by PLC (ADiS by AmiT). Control PC – autonomous data acquisition and control system, which can be controlled remotely via GPIB interface (integration into large scale laboratory measurement tasks). Design and delivery of intelligent revolution counter with RS232C interface.
Elektrovod Bratislava, a.s.
2001, Bratislava, Slovakia, Power Network Analyser BK-ELCOM, Power Network Analyser BK-ELCOM
GraphiTools L.L.C.
2001, Dubai, United Arab Emirates, Dubai City Map, Development of multimedia system for model of Dubai City located in Dubai Municipality Hall (city highlights information). Multi-access concept (2 PCs - token). LabVIEW™ with ActiveX HTML page component. LED net controlled by custom-built hardware.
Infineon Technologies, s.r.o.
2001, Trutnov, Czech Republic, Laser Diode Testers, Development of LabVIEW applications for several laser diode testers.
Kappa, a.s.
2001, Šťůrovo, Slovakia, Power Network Analyser BK-ELCOM, Power Network Analyser BK-ELCOM
KOMPEL, s.r.o.
2001, Brno, Czech Republic, Power Network Analyser BK-ELCOM, Power Network Analyser BK-ELCOM
LaborTech, s.r.o.
2001, Opava, Czech Republic, Design and Manufacturing of Vision Systems for Hardness Testing Machines, Design and manufacturing of vision systems (camera and fixed or replaceable lenses) for evaluation of ball indentation hardness according to Brinell and Vickers. Delivery of National Instruments image acquisition hardware.
LEM Instruments
2001, Vienna, Austria, PowerVIEW, Sophisticated, scalable graphical application satisfying all user\\\\\\\'s needs for work with new generation Norma power analyzers. Modular architecture allows adding of new features using plug-in technology. Compared to NormaX, PowerVIEW allows user to show data in graphs, communicate with the instrument via GPIB interface. Advanced data export capabilities.
Prague Water Supply and Sewerage Company - Karany Waterworks
2001, Karany, Czech Republic, Water Treatment and Supply NI Lookout™ SCADA Application, Upgrade of monitoring and control system in control room of pump and switching station in Karany Water Treatment Plant. PC based monitoring and control server running communication and GUI tasks. Distributed plant floor data acquisition based on NI FieldPoint™ modules, OPC communication with ABB feeder terminals REF-541, NetDDE communication link with remote data loggers, control of mimic board, serial connection to Electronic Security System, etc. Developed in National Instruments Lookout™. National Instruments FieldPoint™ modules interfacing with technological variables and acting as outputs for control of 6 kV and 0.4 kV switching boards. Long term logging and trending of energetic and technological variables. Time synchronization with DCF77 sender. Single control station and several client stations with access privileges.
Rohde&Schwarz GmbH
2001, Memmingen, Germany, Production Test Systems for Nokia Cellular Phones, Development of software for Nokia base station and mobile station testers.
SME (Severomoravská energetika), a.s.
2001, Ostrava, Czech Republic (Power Distribution Company), Power Network Analyser BK-ELCOM, Power Network Analyser BK-ELCOM
TES, s.r.o.
2001, Třebíč, Czech Republic, Power Network Analyser BK-ELCOM, Power Network Analyser BK-ELCOM
Výzkumný ústav pro hnědé uhlí Most, a.s.
2001, Most, Czech republic, Power Network Analyser BK-ELCOM, Power Network Analyser BK-ELCOM
AUS (American University of Sharjan U.A.E.)
2000, Sharjan, United Arab Emirates (University), Power Network Analyser BK-ELCOM, Power Network Analyser BK-ELCOM
AVX Czech Republic s.r.o.
2000, Uherské Hradiště, Czech Republic, Ceramic Capacitor Lifetime Tester, Long-term measurement of capacitor ageing stimulated by high temperature.
Precise measurement of residual current.
Simultaneous measurement of up to 400 SMD capacitors.
AVX Czech Republic s.r.o.
2000, Uherské Hradiště, Czech Republic, Tester of Ceramic and SMD Capacitors, Tester of ceramic capacitors.
Control application developed in National Instruments LabVIEW®.
České dráhy, a.s. TÚČD
2000, Czech Republic, Power Network Analyser BK-ELCOM, Power Network Analyser BK-ELCOM
EMCOS, s.r.o.
2000, Teplice, Czech Republic, Power Network Analyser BK-ELCOM, Power Network Analyser BK-ELCOM
LEM Instruments
2000, Vienna, Austria, Feasibility Study of PC-based Instrument, Feasibility study concerning certain issues of G programming language for instrument firmware development.
SČE (Severočeská energetika), a.s.
2000, Děčín, Czech Republic (Power Distribution Company), Power Network Analyser BK-ELCOM, Power Network Analyser BK-ELCOM
Slovenská technická univerzita
2000, Bratislava, Slovakia (University), Power Network Analyser BK-ELCOM, Power Network Analyser BK-ELCOM
SME (Severomoravská energetika), a.s.
2000, Ostrava, Czech Republic (Power Distribution Company), Power Network Analyser BK-ELCOM, Power Network Analyser BK-ELCOM
Tesla Sezam, a.s.
2000, Rožnov pod Radhoštěm, Vision System for Button Cell Diode Production Testing, Visual testing of presence and quality of laser-burned description on button cell diode·
Processing of pictures captured by custom-built vision system (camera, lightning and fixtures, control and monitoring PC).
VUT (Vysoké učení technické v Brně, Polytechnic)
2000, Brno, Czech Republic (University), Power Network Analyser BK-ELCOM, Power Network Analyser BK-ELCOM
Energy Research Center - VSB - Technical University Ostrava
2000, Ostrava, Czech Republic, Accredited Boiler Testing Laboratory, Delivery of complete laboratory equipment for accredited extremely accurate measurements on boilers. Client (data logger) - Server (operator) technology on TCP/IP. Data measurement and analysis based on NI FieldPoint™ distributed I/O modules and NI LabVIEW™.
Výzkumný ústav pro hnědé uhlí Most, a.s.
2000, Most, Czech Republic, Power Network Analyser BK-ELCOM, Power Network Analyser BK-ELCOM
VŠB - Technical University, Faculty of Geology
2000, Ostrava, Czech Republic, Visualization of Geology Maps in Geological Pavilon of VSB TU Ostrava, 317 LEDs controlled by one chip micro-controller. System controlled by PC with self-designed parallel interface module. Link to multimedia application.
VŠB - Technical University, Polytechnic, Department of electrical power engineering
2000, Ostrava, Czech Republic (University), Power Network Analyser BK-ELCOM, Power Network Analyser BK-ELCOM
Železnice Slovenskej republiky
2000, Vrůtky, Slovakia, Power Network Analyser BK-ELCOM, Power Network Analyser BK-ELCOM
Brano a.s.
1999, Hradec nad Moravicí, Czech Republic, Test Sequencer, Multipurpose test sequencer.
Brano, a.s.
1999, Hradec nad Moravici, Czech Republic, Software application for control of pneumatic marking device, Extension of car lock tester, new marking device. Driver software for
serial communication developed in LabVIEWT.
EMCING, s.r.o.
1999, Smržovka, Czech Republic, Power Network Analyser BK-ELCOM, Power Network Analyser BK-ELCOM
EnergoAqua, s.r.o.
1999, Rožnov p. Radhoštěm, Czech Republic (Power Distribution Company), Power Network Analyser BK-ELCOM, Power Network Analyser BK-ELCOM
GraphiTools L.L.C.
1999, Dubai, United Arab Emirates, Development of Statistics Calculation Module for Mineral Water Production Monitoring, Development of additional application for statistics evaluation of production. Long term wastage statistics. Graphical display of single machine / whole line statistics. Data export.
LeCroy S.A.
1999, Switzerland, LcVIEW – Integrated Data Acquisition, Data Processing and Data Presentation System for LeCroy Digitizing Oscilloscopes and Ultra-fast PlugIn Boards SigAq and SigGen (GaGe), SW application for MC Windows NT and MS Windows 95. Written in NI LabWindows/CVI and MS Visual C++.
Power Distribution Company SME, a.s.
1999, Ostrava, Czech Republic, Control of overvoltage and overcurrent protection devices, Software application for control of overvoltage and overcurrent
protection devices.
Západočeská univerzita
1999, Plzeň, Czech Republic (University), Power Network Analyser BK-ELCOM, Power Network Analyser BK-ELCOM
Zkušebnictví, a.s.
1999, Běchovice, Czech Republic, Power Network Analyser BK-ELCOM, Power Network Analyser BK-ELCOM
ZTS Elektronika, a.s.
1999, Dubnica nad Váhom, Slovakia, Production Tester of Custom-Built Electronic Circuit, PC-based Tester for electronic module performing circuit test.
ATESO, a.s.
1998, Rakovník, Czech Republic, Car Heater Tester, Tester for measurement of electrical parameters, temperatures and combustion.
České vysoké učení technické - Fakulta elektrotechniky
1998, Praha, Czech Republic (University), Power Network Analyser BK-ELCOM, Power Network Analyser BK-ELCOM
GraphiTools L.L.C.
1998, Dubai, United Arab Emirates, Visualization of Mineral Water Production in Masafi Mineral Water Co., Ras-Al-Khaimah, United Arab Emirates, Visualization of technological process controlled by Siemens SIMATIC S5, S7 PLCs. Stores machine status at power failure. PROFIBUS FMS industrial network. Application developed in NI BridgeVIEW. Applicom OPC server and PC1500PFB Profibus interface.
GraphiTools L.L.C.
1998, Dubai, United Arab Emirates, Development of LabVIEW Communication Module for Husky Co., Canada, Injection Molding Machine, Communication module for conversion of Ethernet messages from the Husky Injection Molding Machine to BridgeVIEW™ tags. Automatic re-connection after power failure. Includes event logger.
INOVA Praha, s.r.o.
1998, Praha, Czech Republic, Application for Setup of PID Regulator Constants/, Communication with customer hardware by means of DLL libraries with NI LabVIEW user interface.
PRE (Pražská energetika), a.s.
1998, Praha, Czech Republic (Power Distribution Company), Power Network Analyser BK-ELCOM, Power Network Analyser BK-ELCOM
SME (Severomoravská energetika), a.s.
1998, Ostrava, Czech Republic (Power Distribution Company), Power Network Analyser BK-ELCOM, Power Network Analyser BK-ELCOM
Strojírenský zkušební ústav
1998, Brno, Czech Republic, Power Network Analyser, Power Network Analyser
VAPE
1998, Ostrava, Czech Republic, Bulb Tester, Application for control of bulb tester.
ZTS Elektronika SKS Ltd.
1998, Dubnica nad Váhom, Slovakia, Tester of Switching Power Supplies NIKE, Tester of power supplies, electronic load simulation.
ZTS Elektronika, a.s.
1998, Dubnica nad Váhom, Slovakia, Tester of Tank Loading System, Relay system control.
ATESO a.s.
1997, Jablonec nad Nisou, Czech Republic, Life cycle tests for hydraulic automobile brakes, Automation of life cycle tests for automobile hydraulic brakes.
Brano a.s.
1997, Hradec nad Moravici, Czech Republic, Tester of Automobile Locking Systems, Strain gauge measurements.
EnergoConsult ČB, s.r.o.
1997, České Budějovice, Czech Republic, Power Network Analyser BK-ELCOM, Power Network Analyser BK-ELCOM
G+M Ingenieur Buero GmbH
1997, Waldshut-Tiengen, SRN, Visualization of Sludge Drying Unit in CHEMOPETROL Litvinov, Visualization of technological process driven by Siemens SIMATIC S5 PLC, using PROFIBUS DP for the data communication. Application based on COM PROFIBUS SW, OLE/DDE Server and NI LabVIEW™.
Jäkl, a.s.
1997, Karviná, Czech Republic, Monitoring and Visualization of Compressors, Energy consumption and efficiency evaluation. Interfacing with control unit INMAT 66 based on serial data communication. Data storage.
KOS, s.r.o.
1997, Krnov, ABS (Anti Blocking System) Tester for Railway Coaches, Simulation of railway coaches by HW interface – four tachometer generators, valves.
Motorola, s.r.o.
1997, Rožnov pod Radhoštěm, Automation of Dynamometer, Dynamic tests definition for control units based on one chip microcontrollers
Science Technological Park Ostrava, a.s.
1997, Ostrava, Czech Republic, LAN Structured Cabling in Ostrava Science Technological Park Center, Configuration of Windows NT server. Design and completion of LAN cabling. Connection to the Internet.
Energy Research Center VSB - Technical University Ostrava
1997, Ostrava, Czech Republic, Regulated Power Supply, Project and manufacturing of regulated power supply for test boiler.
Dewetron GmbH
1996, Graz, Austria, SW Application for Paper Mill Huyck, Calculation of parameters for paper mill technology.
Power network analyzer BK-ELCOM
1996, , Electrical Power Quality Measurement - Field Instruments BK-ELCOM, Power network analyzer BK-ELCOM - unique measurement system for identification and analysis of backward effects and interference in power networks, measurement of basic electrical quantities such as voltages, currents, reactive, active, apparent power and energy in all measured phases, flicker measurement, voltage monitor in accordance with EN 50160. This powerful instrument was developed and realized on the virtual instrumentation technology according with European Standards and IEC recommendations. Power Network Analyzer BK-ELCOM is manufactured in different hardware configurations (incl. case) suitable for various measurement tasks and environments. Currently there are 14 instruments integrated in BK-ELCOM analyzer. For any integrated instrument exist easy-to use post-processing. Complete set-up and on-line data are accessible via remote commands. Power Network Analyzer BK-ELCOM comprises of the following instruments: FFT Analyzer of Harmonics and Inter-harmonics for 4 voltages, 4 currents, and 4 powers (EN 610004-7, EN 50160), Oscilloscope, Vector-Scope on specified harmonics, Monitor of Power and Energy, Flicker Meter (EN 61000-4-15), Voltage Monitor (EN 50160), Transient Recorder (buffer 61kS/ channel), Telegram Signal Analyzer, Alarm Monitor, Symmetrical Components Analyzer, Impedance Monitor (network and load), Half-Period RMS Maximum/Minimum U+I Analyzer, Data Logger for Slowly Varying Signals (e.g. temperature), Disturbance Recorder.
Stationary Monitoring with Power Quality Analyzer BK-ELCOM
1996, , Electrical Power Quality Measurement - Stationary Monitoring with Power Quality Analyzer BK-ELCOM, Power analyzer BK-ELCOM can easily be used for distributed power quality monitoring (built-in configuration). To better meet demands of static measurement, the following additional software modules can be delivered: Full remote control and on-line monitoring of remote power analyzer BK-ELCOM. Data acquisition into a SQL database. Presentation of acquired data on web pages (Internet or LAN).